720*530III Fully automatic micro-computer thermoforming machine

 

1.  Feeding sheet, fold mould, stretching and forming are controlled by advanced hydraulic and pneumatic technology.

2.  The machine has the advantages of stable running, powerful action, efficiency and saving energy.

3.  Heating cabinet is consist of vertical 8lines and horizontal 4lines, total 12lines. Temperature distributes reasonable and heating even.

4.  The machine is widely used, reliable operation, low noise, stable performance and finished product better quality

 

II. Technical parameter: 

 

III. Machine component:

1. Main machine                     1pcs

2. Electric heating cabinet       1pcs

3. On-line feeding sheet rack   1pcs

4. Stainless shield                   1pcs

 

IV. Main configuration of the machine

Oil pump motor (15KW)	Jiangsheng/Jiangmen
Feeding sheet motor	Dongli/Taiwan
Wingding motor	Suboleier/Zhejiang Province
Stretching valve	SMC/Japan
Temperature-controlled meter	Fuji/Japan
Pneumatic magnetic valve	SMC/Japan
Cylinder	AirTAC/Taiwan
Stretching cylinder	AirTAC/Taiwan
Heating tiles	Dongtai/Jiangsu
Voltage regulating modular(200A)	GMAX/Xiamen
Program proximity switch	Omron/Japan
Button	Schneider/France
PLC	Mitsubishi/Japan
Touch screen	Weinview/Taiwan
Hydraulic valve	Dongfeng/Taiwan
Hydraulic pump	Yuci

 

V. Other detail of the machine

 1. Machine frame is welded by 100# and 120# channel steel, structure is reasonable

 2. Upper and lower mould plate use nodular cast iron (QT500-7) which strong rigidity and resistant to shock

 3. Mould plate moving by 4pillars and pillar guide, which guide the machine running steady and increase the use life of mould.

 4. Guide pillars use 40Cr steel with tempering and electroplate hard chrome into surface mirror.

  Transmission controlled by a Dongli (Taiwan) reducer and power 3.7kw, with frequency converter timing (Fuji/Japan), accurately feeding, strong power and stable.

 5. Feeding sheet caterpillar uses 4/8” toothed with double chains, cooling is stainless tube.

 6. Heating cabinet is made of stainless steel plate, upper and lower pre-heating, with (Jiangsu) ceramic tiles inside. Outside with attemperator to save energy, upper and lower heating cabinet moved by cylinder.

 7. Heating by heating cabinet with total 12lines of tiles. 8lines vertically and 4lines horizontally.

 8. Forming by stretching cylinder with size ?160×175mm,which has fast speed, improve product transparency and evenness.

 9. Folding mould and automatic cutting use the principle of injection machine, up and down moving driven by hydraulic oil-cylinder connecting rod, running range is 180mm. which has high speed, low noise, high output. Oil-cylinder uses imported sealing, connecting-rod consisted by nodular cast iron with 38crmoA1A steel bushing and steel shaft, which has the advantages of high wear-resisting and long use life, etc.                                                                                         

 10. Winding is a on-line way, mainly the recycling sheet after forming and punching,

 11. Worm speed reducer motor of winding：0.37kw